Free shipping
In two business days
Rolex Official Retailer | Jewellery in Murcia

Un reloj de buceo con alma de 1957: Superocean Heritage B20 de 42 mm, bisel de oro rojo de 18K sobre cerámica azul y correa de caucho azul. Calibre B20 cronómetro COSC de origen TUDOR, 70 h de reserva, 200 m. 6 años de garantía en Pedro Luis Olivares Joyero, distribuidor oficial Breitling en Murcia.
In two business days
By phone: +34 968 271 055 or by WhatsApp: +34 610 085 630
Credit card, Paypal or Payment in installments with Aplazame
In two business days
Phone: +34 968 271 055
WhatsApp: +34 610 085 630
Credit card, PayPal or pay in instalments with Aplazame
Some dive watches are bought to go down forty metres, and some are bought to wear with a white shirt on a Saturday by the sea. The Breitling Superocean Heritage B20 Automatic 42, reference UB2010161C1S1, does both, and that is the whole point: a 42 mm polished steel case, an 18-carat red gold bezel ring over a blue ceramic insert, a matching blue dial and a blue rubber strap closing with a steel folding clasp. Inside sits a chronometer calibre with a back story very few people tell properly.
It goes back to 1957, the year Breitling introduced the first Superocean. In 2007 the brand revived that look as the Superocean Heritage, and in 2017, for the model's 60th anniversary, it launched the second generation that collectors call the Superocean Heritage II: a ceramic bezel insert, refined case and hands and, above all, a new calibre. This steel, red gold and blue combination joined the collection in 2020. The triangle-tipped hands are what Breitling treats as the family signature: hours and minutes are told apart at a glance, with no hunting for which is which.
Because in 2017 the two houses did something rare in Swiss watchmaking: they swapped engines. TUDOR supplied its MT5612 three-hand manufacture calibre, which Breitling adopted with modifications as the calibre B20; in return, Breitling handed over its B01 chronograph, which TUDOR adapted as the MT5813 for its Black Bay Chrono. Breitling says so on its own product page: the B20 is a COSC-certified chronometer based on TUDOR's calibre MT5612.
In practice, that means a serious movement: 28,800 vibrations per hour (4 Hz), 26 jewels and around 70 hours of power reserve. Seventy hours is nearly three days: take it off at eight on Friday evening and it is still keeping time on Monday afternoon. At launch, the specialist press singled out its free-sprung, variable-inertia balance, regulated by adjusting the mass of the balance itself rather than the effective length of the hairspring, an arrangement that copes better with knocks. And COSC certification means every movement has passed the official Swiss chronometer institute's tests, with an average daily rate within -4/+6 seconds.
The gold is solid, and it sits exactly where you see it. The case is polished stainless steel and the outer bezel ring is 18-carat red gold, not plating or a PVD coating; the graduated blue ceramic insert sits on top of it. The hands and indices echo that warm tone so the watch reads as one piece, although on the dial it is colour, not precious metal.
Two things worth knowing. Red gold owes its colour to the copper alloyed with the 75 % fine gold in any 18-carat alloy, and it is softer than steel: the bezel ring will show scuffs before the case does, marks of wear that an official service can soften. Ceramic, on the other hand, does not scratch in everyday use or fade in sun or salt water, but a sharp knock against a hard edge can chip it. And the near-mirror steel shows fingerprints: keep a soft cloth in the drawer.
Across the wrist it is a restrained 42; in height it has real presence. It measures 42 mm in diameter, around 51.6 mm lug to lug according to Breitling technical data published by its retailers, and 14.35 mm thick. As a rough guide, it sits well on wrists of about 17 to 19 cm without the lugs overhanging; under a fitted shirt cuff you will feel it, under a relaxed dress cuff or in short sleeves, not at all. The strap starts at 22 mm between the lugs and tapers to 20 mm at the clasp, which slims the line under the wrist. The steel folding clasp with push-pieces opens and closes without threading the strap through a buckle, which you will appreciate with wet hands. Best checked in person: you will find it at our boutiques on Avenida Constitución, 4 and Gran Vía Escultor Salzillo, 15, in Murcia.
Breitling currently lists two 42 mm Superocean Heritage models with different engines, so it pays to know which one you are looking at. The newer-generation B31 Automatic 42 uses the B31, which Breitling presents as its first exclusive three-hand manufacture calibre, with around 78 hours of reserve, a sapphire display back and a 12.03 mm case. This B20 has 70 hours, a screwed steel caseback and measures 14.35 mm: over two millimetres of difference, and you notice it on the wrist.
Which should you choose? If you want the slimmer watch and like to see the movement, the B31. If you are drawn to the classic bulk of a diver, the closed caseback and this red gold bezel over blue ceramic, the B20, with a calibre TUDOR has produced since 2015 and that has spent nearly a decade proving its reliability. Ask us about both and try them side by side.
You can swim, scuba dive within recreational limits and head into the sea without a second thought: 20 bar (200 m), a screw-locked crown with two gaskets and a screwed caseback. The bezel turns one way only, and not on a whim: if it is knocked and moves, it can only advance the marker, so you will think you have been under longer than you have, never less. It works just as well on dry land: line up the zero triangle with the minute hand when you park and you will know at a glance how long you have been.
An honest caveat: Breitling does not declare ISO 6425 certification on this reference's product page, so we do not claim it. It has a diver's equipment, which is not the same as being certified. To keep those 200 m intact: always screw the crown down before going in, never operate it wet, rinse in fresh water after the sea or a chlorinated pool, and avoid saunas and very hot water, which expand the gaskets.
You have a five-year Breitling international warranty, because the brand classes the B20 as a manufacture mechanical movement (its rule: second letter B in the reference and a number between 01 and 35). Pedro Luis Olivares Jeweller adds one more year: six years in total, which also covers the three-year legal guarantee of conformity in force in Spain.
The small print matters. Breitling's warranty does not cover straps other than metal bracelets, so the rubber strap is excluded, as are knocks, normal wear and any work done outside a Breitling service centre. Breitling also offers, as a paid service on its website, a three-year extension of the manufacture warranty. Breitling servicing is carried out by the brand itself: you bring the watch to us in Murcia and Pedro Luis Olivares Jeweller, Breitling's exclusive official retailer for the Region of Murcia, handles it with the official service centre.
| Reference | UB2010161C1S1 |
|---|---|
| Collection | Superocean Heritage (second generation) |
| Calibre | Breitling B20 (manufacture), based on TUDOR MT5612 |
| Movement | Self-winding mechanical |
| Certification | COSC-certified chronometer |
| Frequency | 28,800 vph (4 Hz) |
| Jewels | 26 |
| Power reserve | Approx. 70 hours |
| Functions | Hours, minutes, centre seconds and date aperture |
| Case material | Stainless steel and 18K red gold |
| Bezel | Unidirectional, ratcheted, 18K red gold with blue ceramic insert |
| Diameter | 42 mm |
| Thickness | 14.35 mm |
| Lug to lug | Approx. 51.6 mm |
| Lug width | 22 mm |
| Crystal | Cambered sapphire, anti-reflective both sides |
| Caseback | Screwed, steel |
| Crown | Screw-locked, two gaskets |
| Water resistance | 20 bar (200 m) |
| Dial | Blue, triangular hands |
| Strap | Blue rubber, 22/20 mm |
| Clasp | Steel folding clasp with push-pieces, 20 mm |
| Warranty | 5-year Breitling international + 1 year Pedro Luis Olivares Jeweller (6 years) |
Yes: with 200 m water resistance, a screw-locked crown and a screwed caseback you can swim and dive recreationally. The one condition is to screw the crown fully down before it gets wet and never touch it underwater.
As a guide, wrists of around 17 cm upwards. Its roughly 51.6 mm lug to lug is moderate for a 42; what you notice most is the 14.35 mm height, so try it on with the clothes you usually wear.
No, the caseback is screwed and made of steel. If you want to see the calibre, the new-generation Superocean Heritage B31 does have a sapphire back.
The lug width is 22 mm, and Breitling makes this same watch on a steel mesh bracelet (reference UB2010161C1A1). Ask us which original Breitling mesh or strap fits before buying one separately.
Breitling watches are serviced by the brand itself at its official centres, and that is the only way to keep the warranty valid. Drop it off at either of our two boutiques in Murcia and we handle the rest.
Unscrew the crown, give it twenty to thirty turns to wind it, set the time and date and screw the crown back down. Avoid changing the date when the hands are close to midnight.
A 1957 diver with a TUDOR heart, a red gold ring and the patience to wait three days on the bedside table: a watch that works as well in the sea as at the dinner afterwards.
| Price | 7.200 € |
|---|---|
| Price by range | 5.000 € - 10.000 € |
| Stock | In Stock |
| Gender | Male |
| Brand | Breitling |
| Strap | Rubber |
| Movement | Automatic |
| Movement | Selfwinding Mechanical Breitling B20 |
| Collection | Superocean Heritage |
| Model | UB2010161C1S1 |
| Cristal | Cambered sapphire, glareproofed both sides. |
| Dial | Blue |
| Case material | Steel & Rose Gold |
| Case size | 42 mm |
| Case size | Over 40 mm |
| Water Resistance | 200 meters |
| Water resistance | 200 m |
| Power reserve | 70 hours approx. |
| Bracelet type | Strap |
| Clasp | Pushbutton folding clasp |
| Function | Calendar |
| Warranty | 5 year international warranty from Breitling plus an additional year from our certified watchmaker. |
